Set for cleaning and impregnating alcantara.
The kit includes the following products:
Cleaning agent for alcantara and fabrics 200ml
Product description: The Alcantara cleaning agent thoroughly cleans and improves the appearance of Alcantara used in furniture, car upholstery, carpets and rugs. Materials such as Alcantara or Amaretta are ultramicrophase materials (synthetic materials) that resemble skin. Appearance and touch are just like raw skin. These materials should be regularly vacuumed and wiped with a damp cloth. In the case of stains and ordinary dirt use Alcantara COLORLOCK ™ cleaning agent.
Usage: Before cleaning, the Alcantara surface must be thoroughly vacuumed. The bottle must be shaken before use. The measure should be tried first in an invisible place! Apply the foam from the bottle to Alcantara. Clean the surface of the material in a circular motion from the seam to the seam, using a skin brush. Repeat if necessary. Wipe the residue with a damp cloth. After cleaning (when the Alcantara is still wet), it should be combed with a clean Colourlock brush in one direction. After drying, the impregnating material should be secured to the fabrics.
Impregnation for fabrics and alcantara 200ml
Product description: Fabric impregnation protects against the staining of Alcantara and fabric. Impregnates are designed to make the surface resistant to water. The impregnant has no nurturing properties. The impregnation can be used for clothes, shoes, upholstery, bags, etc.
Quantities: 200 ml of impregnate is enough to impregnate the furniture set several times. In some cases, using a very dry skin and a non-tended upholstery it is necessary to use a larger amount of agent. Especially in the case of shoes and furniture seats, the impregnation wipes faster and should be applied more often.
Usage: All products must first be checked in an invisible place. Apply a thin and even layer of impregnation on a clean and dry surface from a distance of about 40 cm. Then leave the impregnation to dry. Surfaces exposed to strong wear should be sprayed again after drying. After cleaning or washing, the surface should be impregnated again. The product should be used in accordance with the instructions on the packaging. The safety instructions on the label must be strictly observed.
Important: The impregnation will not make the fabric completely closed. This would significantly reduce her breathing. You will strengthen the protection of the material, however, with upholstery material, nevertheless, care should be taken.
Colourlock toothbrush
microfiber
